Elmo Rietschle provides innovative vacuum and compressed gas solutions to a wide range of applications and processes used in industrial parts cleaning. These solutions reduce energy consumption, improve reliability and uptime, eliminate pollution and provide cost savings.
By clicking on applications listed below, you will see their description and the correlated Elmo Rietschle products that will help with your vacuum and compressed gas needs.
Industrial parts cleaning
In this process, the work piece is blow dried with a side channel blower. The flow volume and pressure of the air stream are critical for the degree of dryness. The temperature of the air stream also contributes to the effectiveness of the drying process.
Relevant Products: Side Channel
With vacuum drying, difficult spots such as blind bore holes, narrow lubrication channels and even internal passage ways can be dried completely, with no residual water remaining in voids or uneven surfaces. In this process, a vacuum is created in the washing chamber. When the pressure drops below that of the vapor pressure of the fluid to be removed, the fluid evaporates and the parts are dried. Most of the vapor removed is trapped in a condensate separator upstream of the vacuum pump. The residual vapor in the air is eliminated by the vacuum pump. Depending on how dirty the parts are, a water or solvent based detergent is employed. In some cases ATEX approved vacuum pumps are required for solvent based detergents, which may be explosive in nature.